BenQ WM04G3 Przewodnik Instalacji Pobierz pdf

English

1. Please read and follow the instructions in this installation guide carefully

before installation and retain them for future reference.

2. The BenQ Corporation is not liable for any damage or injury resulting from

incorrect installation.

3. The wall mounting bracket is designed for easy installation and removal. The

BenQ Corporation accepts no liability for any damage or injuries due to

human action or from natural causes, such as an earthquake or typhoon.

4. This projector wall mounting bracket must only be installed by service

professionals.

5. At least two persons are required for the installation or removal of this bracket

to prevent personal injury, or material damage from heavy falling objects.

6. To ensure proper ventilation, install the projector with sucient clearance

between it and the wall and ceiling.

7. To ensure safe installation and avoid accidents, check the wall structure and

select a solid durable location.

8. The wall should be strong enough to support four times the total weight of

the projector and the wall mounting bracket, or more. It should also be of

sucient strength to bear the force of vibrations from earthquakes or other

events.

9. Check the surroundings of the mounting location before installation.

• Do not install in places where the temperature or humidity is high and

avoid moisture.

• Do not install near an air conditioner or vents, or in excessively dusty or oily

places.

• This product must only be installed on a vertical wall, not a slanting one.

• Do not install in places subject to vibration or shock.

• Keep the projector out of direct sunlight

10. Do not replace any parts or use damaged parts. Please contact your retailer if

you have any questions.

11. Fix the screws tightly but not excessively to avoid breakage or damage to the

threads.

12. The wall mounting bracket can support a maximum projector weight of

5J.J3A10.021: 15Kg or 33.07 lbs 5J.J4V10.011/5J.J4R10.011: 12Kg or 26.46 lbs.

13. Nothing extra must be added to the load on the wall mounting bracket.

Nothing should be attached or hung from it.

14. Holes for the screws will remain in the walls after the projector mounting

bracket has been removed and marks may also result from long term use.

Warning

English

1　　Warning

1 2 3 4 5 6 7

Podsumowanie treści

Strona 1 - 1　　Warning

English1. Please read and follow the instructions in this installation guide carefully before installation and retain them for future reference.2. T

Strona 2 - 4. Cable Management

2　　IntroductionEnglishIntroductionP.4P.3P.7Required Tools / Torque AdjustmentInstallation StepsPackaged PartsP.6P.5Specications / Size / Guide sheet

Strona 3

Packaged partsA AHOIKJPQMLNWrenches(10mm)___1pcsHinge module__1pcsHinge module__1pcsHex bolts (M6xL25)__1pcsHex key(5mm)__1pcsCable management cap__1p

Strona 4 - 6. Pencil

4　　Required Tools/Specications/Size/Angle adjustmentRequired Tools1. Power drill 2. Drill bit 3. Hammer4. Spanner: 8mm / 10mm5. Cross (Phillips) scre

Strona 5 - Guide sheet for hole drilling

5　 SpecicationsConnection plate AMark A ==> MX880UST Mark B ==> MX850UST / MW851UST Connection plate BUltra Short Throw Wall Mount (5J.J3A10.02

Strona 6 - Installation Steps

6　　 Installation StepsInstallation StepsBCDE1.2.3.4.DPIJACPAOQBAQFKFH0.5mmBACQAGELLNMOBA1. Installing the wall bracket A. Make sure the wall bracket

Strona 7

Installation Steps7　 Installation Steps5. Adjusting the projection angleA. Using a hex wrench (K) to adjust the tightness of the internal hex

Komentarze do niniejszej Instrukcji

Brak uwag

BenQ WM04G3 Przewodnik Instalacji

Przeglądaj online lub pobierz Przewodnik Instalacji dla Montaż projektora BenQ WM04G3. Benq WM04G3 Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji